Scale will display “”, when power is turned on and weight is present. Specifications Page 13 – Environment Page 14 – Section 6: Do NOT adjust all 4 feet. Verify all cables within the scale are down flush and will not contact the platform. If the corners are not within one 1 division of each other, conduct a good visual inspection to verify that there are no binds or interference with the platform and re test the scale.

Uploader: Gardakree
Date Added: 25 February 2017
File Size: 20.4 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 57136
Price: Free* [*Free Regsitration Required]

The maximum USB cable length is 5 meters unless a self powered hub is used to extend the cable length.

If the corners are still not within one 1 scalees of each other, identify the corner s with the error and replace the load cell in that corner. It uses default Windows drivers and is installed automatically upon first connection with a PC.

Fairbanks Ultegra Scb-r9000-14u Digital Scale 150lb Capacity

Fairbank text from picture: Page 16 The scale must be calibrated if you proceed past this step. The scale must be calibrated if you proceed past this step. With the platform empty, press the [ZERO] key.

  F700B LG MONITOR DRIVER

By pressing ‘print’ button you will print only current page.

Using the level bubble, adjust one or two feet minimally to level the platform. Calibrate the scale Section 6 Note: Screw in all 4 feet, set upright and re-level Every effort has been made to provide complete and accurate information in this manual.

Fairbanks Ultegra SCB-R9000-14U Service Manual

Calibration Scals -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 The breakdown of the zones are as follows: A low power USB device draws less than mA. Remove the scale from the packing box and place on a flat surface where it will be fzirbanks. Parts Page 23 Page 24 – Appendix I: Page of 29 Go. When the unit is powered, the liquid crystal display LCD will show the software part number and the revision followed by either “0.

Verify all cables within the scale are down flush and will not contact the platform.

Ultegra Roller Top (SCB-R)

Got it, continue to print. Page 11 Section 4: Clean by wiping the scale assembly off with a damp cloth only.

  BRONDI VOIP-5 SKY DRIVER DOWNLOAD

Sales may be ordered with a ball roller-deck surface. To print the manual completely, please, download it. Scale will display “”, when power is turned on and weight is present.

The breakdown of the zones are as follows: Press the [ZERO] key to zero the scale. Comments to this Manuals Your Name.

This manual also for: Don’t show me this message again. IF you are using a remote display, check the main display first, if it’s OK then check the cable and plug connection on the remote First unplug, then plug in the AC adapter to reset the program.

Verify no weight is on the platform. Page 23 Section 8: Corner Test Section 6: All equipment should be protected from direct sunlight.